BTQPN - EPOXY SUPER GLUE PART B, 666

  • MSDS: BTQPN
  • Manufacturer: FIBREGLASS EVERCOAT CO INC
  • Product Name: EPOXY SUPER GLUE PART B, 666
  • National Stock Number: 8040-00N046727
Product Identification

Product ID:EPOXY SUPER GLUE PART B, 666
MSDS Date:08/25/1988
FSC:8040
NIIN:00N046727
Kit Part:Y
MSDS Number: BTQPN

Responsible Party
FIBREGLASS EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-543-4530

Info Phone: 513-489-7600

Cage: FIBRE

Contractor
FIBREGLASS EVERCOAT CO INC
CINCINNATI, OH 45242-5000 US

Telephone: 800-729-7600

Cage: FIBRE

Ingredients

MODIFIED POLYAMINE

Fraction By Weight: <80%

OSHA PEL N/K

ACGIH TLV: N/K


PHENOL, NONYL-; (NONYL PHENOL)

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: <20%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: CAUSES IRRITATION. EYES:
CAUSES SEVERE IRRITATION. INHAL: IRRITATION OF RESPIRATORY TRACT.
INGEST: HARMFUL TO GI TRACT. CHRONIC: PROLONGED OR REPEATED
EXPOSURE MAY CAUSE ASTHMA AND SKIN S ENSITIZATION OR OTHER ALLERGIC
RESPONSE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. IF IRRITATION DEVELOPS, GET
MED ATTN. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET MED ATTN. INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN IF
BRTHG IS DFCLT. GET MED ATTN. INGEST: DRINK WATER TO DILUTE AND
GET IMMED MED ATTN.

Fire Fighting

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:TAKE UP WITH ABSORBANT MATERIAL SUCH AS
VERMICULITE, SAND, EARTH, ETC. WASH CONTAMINATED AREA WITH SOAP AND
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN ORIGINAL TIGHTLY CLOSED
CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USED NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAP/MIST EXPOSURE IS LIKELY. WEAR A NIOSH/MSHA
APPROVED DUST MASK WHEN SANDING CURED PRODUCT.
Ventilation:GOOD GENERAL MECHANICAL VENTILATION AND LOCAL EXHAUST IF
NEEDED.
Protective Gloves:PLASTIC/CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORK GOG & (SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT: FULL LENGTH FACESHIELD .

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>392F,>200C
Vapor Density:>1
Spec Gravity:1.05
Solubility in Water:NIL
Appearance and Odor:AMBER PASTE-AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND ACIDS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.